Cut the line wings

The line wings can be cut by the cutMode and cut parameters. Reasons for cutting the line wings can either be that the line wings would be overestimated, or just to save computing time. Line wings or cut at the specified distance from their central peak location. Choosing a broader cutting lenght can increase the computational time. In Fig. 4 is shown an example with three different cutting lenghts.

Relevant parameters for this example:
  • doStoreFullK = 1

  • cutMode = 0

  • cut = 25, 100 or 0


Fig. 4 Three cutting lengths of the line wings. An infinity cuttoff lengths can be set by cut = 0.